+62 (031) 8284914, 085100605225, 085100974976, Fax. +62 (031) 8284955 sumberarumabadi@gmail.com
4200

STAT FAX 4200 MICROPLATE READER NEOGEN USA

Product Description

4200 4200-h

1.5 Specifications
Photometric
Linear Measurement Range: …………………0.0 to 4.0 Absorbance Units (A)
Photometric Accuracy:………………………….+/- 1% orbetter (NIST)
Stability:……………………………………………..Drift ofno more than 0.005A in 8
hours
Light Source:………………………………………Halogen lamp with lamp saver feature
Standard Wavelengths: ………………………..405, 450, 492, and 650nm
Filter Type:………………………………………….IAD hardcoat interference, 10nm half
bandpass
Vessel:……………………………………………….Standard 96-well microtiter plates, or
strip trays
Electronic
Display:………………………………………………Interactive touch screen 5.7” (14.5cm)
LCD, color graphic display
Printer: ……………………………………………….Thermal dot matrix, 20 characters per
line, plus graphics
Power Requirements:…………………………..115V or 230V AC, 1.5A, 50-60Hz
(universal input)
Microprocessor: …………………………………..eZ80, 64K EEPROM
Memory:……………………………………………..768K bytes Flash Memory, 1MB static
RAM Memory
Interface:…………………………………………….USB mouse; USB port used for thumb
drive interface for firmware updates
(mouse not included; thumb drive not
included)
Software
Speed: ……………………………………………….Reads absorbances of 96 wells in
about 10 seconds
Calculation Modes:………………………………Absorbance, Factor, Cutoff Standard,
Point-to-Point, Regression, Cubic
Spline, Cut Off Mode
Test Menu:………………………………………….Stores and recalls 100 stored tests (80
user testsand 20 Neogen
preprogrammedtests) with parameters
including wavelengths, calculations,
unit codes, linear and normal ranges,
standard values, test names, and
previous standard curve.
NOTE: Neogen pre-programmed
Test 18 GeneQuence may not be   cloned or edited.
Stat Fax 4200 Microplate Reader Operator’s Manual Doc. 4201 Rev. A  7
Specifications (Continued)
Other
Enclosure:…………………………………………..Flame-retardant ABS/PVC alloy
material cover with aluminum base
Dimensions:………………………………………..Approximately 8-1/4”x13.5”x17”
(21cmx34.3cmx43.2cm)
weight: 12 lbs (5.4kg)
Environmental Conditions for Safe Operation
Indoor use   Altitude up to 2000m   Temperature 5°C to 40°C (Although it may be safe to operate in these
conditions, it may not be suitable for
the performance of your tests; check
with your supplier.)
Humidity 80% for temperatures up to 31°C, decreasing linearity to 50%
humidity at 40°C Mains supply voltage
fluctuations not to exceed +10% of
nominal voltage
Recommended Environmental Conditions
Recommended Operating Temperature ….18-35°C
Recommended Operating Humidity:……….less than 80%
Storage Temperature:    10 to 50°C